RADOX Solar cables according to EN-standard
The latest RADOX® solar cables comply with the current EN-standard and are designed for higher system voltage and AC-PV applications. As a result of successful testing and approval by the TUV Rhineland testing authority, HUBER+SUHNER offers a significantly improved RADOX WW cable generation.
Testing by the TUV Rhineland authority is important for acceptance in the solar cable market. HUBER+SUHNER initiated these tests and passed them successfully. The tried and tested dual classified RADOX® Solar SMART cable will remain part of the solar cable range and is particularly suitable for the UL market.
Suitable for confined spaces
Two cables have been developed for applications with system operating voltages of up to 1000V DC: RADOX® Solar 125 WW and RADOX® Solar 125 RW. RADOX® Solar 125 WW is designed for standard use in PV installations up to 1000V. RADOX® Solar 125 RW is a specialisation of the WW version. The wall thickness of the RW version corresponds to the minimum thickness required by 2Pfg1169/08.07. This results in a slim, very flexible cable which is particularly suitable for use in confined spaces. This cable is slightly more cost-efficient than the standard version due to the thinner wall thickness. It should be noted that the RW version is only approved in accordance with the currently valid 2Pfg1169/08.07. By contrast, the WW version satisfies the current 2Pfg1169/08.07 and also complies with the future EN50618 standard.
Systems up to 1000VDC
• RADOX® Solar 125 WW cables
• Tested and approved in accordance with 2Pfg1169/08.07, PV1-F
• Tested cross sections: 2.5mm2, 4.0mm2, 6.0mm2 and 10.0mm2.
• AC U0/U 0.6/1kV; 1.8kVDC
• Certificate R60089760
• Complies with EN50618
The 'light' version is RADOX® Solar 125 RW. This cable has also been developed in accordance with 2Pfg1169/08.07, PV1-F. As the result of its slim design, it is space-saving and highly flexible. Testing in accordance with 2Pfg1169/08.07 is pending.
Systems up to 1,500VDC
• RADOX® Solar 125 WW+
• Tested and approved in accordance with 2Pfg1990/05.12, PV1500DC-F
• Tested cross sections: 2.5mm2, 4.0mm2, 6.0mm2 and 10.0mm2.
• Certificate R60089765
The RADOX® Solar 125 AC has been specially developed for AC applications. This multi-conductor cable enables AC requirements in solar systems to be met.
• Tested in accordance with 2Pfg1940/11.12, PV07AC-F.
• Tested and available: 2x2.5mm2 and 3G2.5mm2.
• AC U0/U 450/750V
• Certificate R6008987.
More information: